All posts by admin

13Feb/21

How to fix Epson Scanner GT-S50 Setup

Epson Scanner GT-S50 Setup

A common sheet-fed business scanner that comes with a 75-page auto document feeder is the Epson scanner GT-S50 setup. This scanner is used for the processing of high-volume documents with a single touch. Due to its high-quality and efficient scanning process, a significant number of individuals use this scanner. All you have to do after purchasing an Epson printer scanner GT-S50 is to perform the setup process for the Epson scanner GT-S50. If you are unaware of this process, then this article can be followed to the end. It consists of a step-by-step guide that will assist you with the complete setup. Let’s start with the process of setting up and installation.

Epson Scanner GT-S50 Setup

Perform Epson Scanner GT-S50 Setup: Easy Steps

Here are some easy steps, using which you will be able to perform this action on your own.

Step 1: Download Epson Scanner Driver

You first have to download the Epson Scanner Driver in order to set up your scanner. By using the steps listed below, you can do this.

  1. Second, open up the official Epson website.
  2. After that, in order to open the home page of the local website, you have to pick your area. Estados Unidos, for instance.
  3. Once done, to download the driver for your Epson scanner, you have to follow the step-by-step on-screen guidance.
  4. You are allowed to use the model name of your scanner as well as the particular operating system in order to download the correct scanner.
  5. (32-bit Windows 10 or 64-bit Windows 10).
    This driver can also be downloaded from different kinds of help sites.

Step 2: Setup Network Scanning

For setting up your scanner, you can also use this procedure. For that, follow the steps mentioned below.

Do the following to open the Epson Scan 2 Utility, as per the system which you are using:

In the case of Windows 10:

You need to press the Windows button on your keyboard first, then go to the Epson browser. Open the Epson Scan 2 Utility once completed.

In the case of 8.x for Windows:

If you are using a version of Windows 8.x, you need to go to the Applications screen and select the Epson Scan 2 Utility.

If you are using Windows (other versions):

Click the Start button and go to the All Programs or Programs page. Go to the EPSON once finished and open the Epson Scan 2. Additionally, tap on the Epson Scan 2 Utility.

If using a Mac device:

You need to tap the Epson program to open the Applications folder, as well as tap the Epson Scan 2 Utility. Choose the settings from the scanner’s drop-down chart.

After doing that, execute the steps provided below:

  1. If you note the Allow Edit button, as well as the lock screen button, then the scanner settings can be changed. Pick your scanner, then tap on the Add option.
  2. Now, look for the network and select your Epson network interface unit’s IP address. Tap on the Add option also.
  3. Otherwise, you can use the Enter Address setting and enter your Epson Network interface unit’s IP address or hostname. Tap on the Add option after that.
  4. Then, to verify the Internet connection, tap on the OK option. You’ll be able to see a confirmation page there.
    Once done, to save your settings, click the OK button. Close the Epson Scan 2 utility at last.

In this way, you will be able to set up your scanner driver.

Related Blog: Epson V500 Scanner Setup

To Conclude

Hopefully, you will be able to perform the Epson scanner GT-S50 setup without any danger by using these expert given tricks. In that case, it is recommended that you try to follow each and every move carefully, not to jump any of them. Then you can leave a comment in the comment section if you find this article helpful.

11Feb/21

How to fix Epson V500 Scanner Setup

Epson V500 Scanner Setup

Epson is a well-known brand in the technology industry. The Epson printer enters our minds first when we think of scanners. Epson V500 Printer Setup holds its role due to its superior printing as well as scanning accuracy. But nowadays, Epson users often face difficulties when setting up their Epson scanner for the first time.

You have just hit the right page if you are in the same situation. Here in this post, we are going to cover the Epson V500 scanner setup process. Therefore, to grasp the general procedure in-depth, you are advised to go through the article below.

Epson scanner v500 setup

Epson V500 Scanner Setup: Easy and Effective Process

Using the Epson Perfection V500 scanner, you can easily search various file types for your images, slides, documents, and negatives. You can even save them on your hard drive, too. Follow the setup procedure for the Epson V500 scanner that is given below.

Before going to the setup process, perform the steps as follows:

  • Firstly, with the aid of the library card barcode, you have to log in to the device
  • that is connected to your Epson scanner.
  • Attach the flash drive to your computer’s USB port.
  • You have to press on the Epson Scan button twice now.
  • After that, you must check that the scanner mode has been set to Full Auto Mode.
  • Click on the option to ‘Customize’.
  • Now, click on the option ‘Save Settings.’
  • Go to the flash drive and perform the following:
    • Select a different radio button.
    • You will see a new window now and pick the option ‘Browse’.
    • You have to click on ‘+’ in the next browser (plus). This ‘+’ option will be
    • placed near the ‘Machine’ option.
    • For the flash drive, pick ‘E:\ Removable Disk’.
  • From the File Settings window, pick the image format (PDF for Documents and
  • JPG for Negative/Slide/Photo). Now, you’ve got to press the OK button.
  • Close all the windows in the system that are actually operating.

Basic Scanning:

  1. After inserting the flash disk into the scanner, you need to open the cover of the scanner. Then align the top-right corner of the image or text that an arrow denotes. Now, you’ve got to close the cover.
  2. Click on the Scan option on the machine. Now, a preview will show you your Epson scanner. As well as setting the scanning resolution, decide the page format. After that, the scanner will begin scanning the file and saving it. You can see the flash disk content window at this time.
  3. Now, exit the window by pressing both the Alt key and the F4 key simultaneously.

Using the Slide/Film Holders:

If you want to scan the slides or negatives, then you need to get the help of a slide/film holder.

  • You have to remove the document scanner mat from the base of the scanner lid first.
  • Then, face down towards the holders, you have to position the negatives or slides.
  • Each component form was associated with a letter (e.g. C = Slides) on its holder.
  • Using the printer slot on the left side of the flatbed to change a similar lettering tab. In the center, the object to be scanned must line up with the glass window in the printer lid.

From here, you need to perform the ‘Basic Scanning’ steps discussed earlier. Now, the scanner will identify the type of element as well as choose a relevant resolution.

Know-How to Scan the Multi-Page Document in a Single File:

Before going to scan multi-page documents, you need to set up the scanner by performing the steps mentioned earlier. After that, follow the steps as follows:

  • You have to choose Office Mode after you open the software.
  • On the right side of the screen, press the File Save Settings button.
  • Now, you have to pick a place for the file to be saved. Try to save the file to the folder ‘E:\Removable Disk’.
  • First, for the papers, you need to choose the PDF file.
  • You’ll see the Show Add Page dialog box after scanning. You have to tick the box now.
  • You need to pick ‘Save the file’ or ‘Add additional pages’ after each page.

You need to mount the Automatic Document Feeder by detaching and removing the cover of your Epson scanner in order to scan documents that are longer than 10 pages per file or up to 30 pages in total. The Epson scanner never scans documents on both sides, but it is important to scan both sides of each page. Therefore, the pages of your file need to be ordered. To organize this, follow the steps below:

  • You need to make sure that you have reviewed the Display Add Page dialog box after performing the above steps.
  • When the dialog box appears, press Edit Page to manage the various pages in the folder.

Additional Guide: Quick Epson V500 Scanner Setup Guide

Follow the setup steps given below for Epson V500 scanner setup:

  1. Unpack your Epson V500 printer first. Remove it from the tape with shielding.
    Now, using the DVD/CD that comes with your Epson printer, you have to install the appropriate printer software.
  2. Don’t connect a device to the USB cable. Click on the option ‘Setup’ and then follow the instructions on the screen. You have to click on it when Windows prompts the ‘Run Epsetup.exe’ option.
  3. Then you have to attach the printer’s AC adapter to it. Plugin the adapter with the power supply to connect it.
  4. Now, in order to turn it on, push the Power button on your Epson printer.
  5. Hold the document you want to scan at a suitable spot. Click your Epson V500 printer’s Start button.
  6. Click on the ‘Scan’ option.
  7. The Epson printer will now begin scanning the document in Full Auto Mode. Wait for a few seconds before the scan process is done by the scanner.
  8. After that, you can view a photo by navigating to your computer’s My Pictures or Pictures folder.

Related blog: Epson scanner v600 setup

Final Words

We have included a basic Epson V500 scanner setup method in the above guide. In the condition in which you are, apply them and make a difference. We think, in a short period of time, it will help you set up the scanner in a proper way. If you still face some trouble after following the above measures, then you can contact a tech expert. In addition, via the comment box provided below, you can also share your queries.

09Feb/21

How to Fix Epson Printer Error Code W-02

Epson Printer Error Code W-02

As users work with the printer system, the Epson printer error W-02 is a consequence of the paper jam problem. Other problems, such as incorrect feeding of the paper into the unit and not correctly ejecting the paper. Ok, users need not think about it because we have the best ways to do it to Epson Printer error code W-02  with proper explanation.

Epson Printer Error Code W-02

Steps to troubleshoot Epson Printer error w-02

Step 1: Solve the Epson Printer error w-02 issues of “Paper Does Not Feed Correctly”

If the paper is not correctly positioned, it is recommended that you remove it from the sheet feeder. Just reloading it on the right side, right behind the button, is the next thing that is needed. You are now asked to click on the tab located on the left edge and slide it against the paper a little further. If users are discovered to have placed several pages at a time, then, it is suggested to remove the paper from the sheet feeder and is needed to fan the edges to separate the sheets.

Reload it later. For users, it is recommended to load up to a certain number of sheets. To load the printable side up, make use of all fresh, smooth, high-quality paper quality. Be careful not to load the paper into a binder with holes drilled into it for the purpose of insertion.

Step 2: Clear out all paper Jam

Take all the stuck paper gently out of the output tray. Check whether or not the paper is stuck inside the unit and turn the Epson printer off. Lift the scanner up and then, by lowering the scanner, remove the stuck paper or any broken parts. Now switching the printer back on again.

Step 3: Check for any ejected paper issue

Try setting the incorrect paper size if the paper does not eject completely. Now, click the “Start” button carefully and open up the scanner to quickly extract the file. When you are asked to reprint, pick the required paper size. If it is still found to be in jammed condition, load new documents.

Call us at Support +1-833-639-7277 for solving Epson error code w-02

Get connected to our technicians at Printer Customer Service Number to immediately repair your Epson Error Code w-02 critical to critical level queries. We are assisted by a team of highly trained, rich and knowledgeable technicians who are always ready to help users solve technical problems with their Epson printer.

03Dec/20

How to Fix Epson Printer Error Code 000043

Epson Printer Error Code 000043

When switching on your printer, you can also encounter Epson Printer Error Code 000043. It occurs when there is no loading of the printhead or ink cartridges into the printer. Inside the printhead or on the printer scanner, dust can accumulate. As a consequence, you may be faced with a mistake. Behind Error 000043 in Epson are several such causes. As well as effective preventive steps, this article addresses the causes.

The Epson Error Code 000043 error occurs primarily due to some conflict in the scanner part of the device. This can also arise because of any technological problems or internal equipment issues. This can seriously hamper your work in printing and interrupt work. But don’t worry, we have provided you with some helpful solutions here in this article to address this mistake.

epson-printer-error-code-000043

Easy Steps to Repair Epson Error Code 000043

Do not panic if you are having a hard time with Epson Error Code 000043. A few basic steps that will assist in this are below. To find out the problem, go through the steps below.

Method 1: Uninstall and Reinstall Printer Driver

  • Press and hold the on or off button to restart the printer first.
  • To move to the Start Line, click the Start icon.
  • Scroll down the list and press ‘Print Management’ on the snap-in button.
  • Right-click on the driver that you want to disable.
  • Then, select and click the Delete Driver Package option.
  • Next, open the printer again.

Method 2 – Fix the Expended Ink Cartridge Issue

  • This error can be eliminated by simply taking the steps below:
  • First of all, you’ll need to turn your printer machine on.
  • Replace the ink cartridge as the printer expands.
  • Then, check the small clips of metal that direct contact with the chip.
  • Make sure the cartridge chip is also cleaned.
  • After that the printer driver in your operating system is reinstalled.

Tip 3:- Inspect the Paper Piece.

The error message may usually be caused by a paper jam. You need to scrutinise the device inside of the Epson Printer after that. Somewhere to make sure that a small notepad is not lost.

Tips 4:- Turn off the Printer

Switch off your Epson printer first.
On the printer after the switch, when “init.”
Then enter ‘Copy Light’ and then switch the printer off and turn it back on again.

Other Common Epson Printer Error 000043 related

The Epson Printer will receive an error similar to Epson Printer Error 000043, which can be resolved by following the above steps. Those errors related to this are:

  • Epson Printer Error Code 000041
  • Epson Error Code 000033
  • Epson Scanner Error 9923
  • Epson Printer Error 033001
  • Epson Printer Error Code 000031
  • Epson Scanner Error Code 100016

Related Post:- Epson Printer Error Code 000041

Contact for Epson Printer Error Code 000043

Call Epson Support for assistance if you want to patch any of these errors. When you place a call on our toll-free number, we also allocate your call to one of our qualified technicians. The technician often takes away the issue and assists you in fixing it. Contact the Customer Service Number of the Epson Printer

03Dec/20

How to Fix Epson Printer Error Code 000041

Epson Printer Error Code 000041

Easy Way to Fix Epson Printer Error Code 000041 – There are a number of Epson printers, such as Company Inkjet printers, InkTank printers, professional image printers, etc. It is very apparent to experience problems when you are operating on any technological unit. But you don’t have to think about how to patch Epson Printer Error Code 000041 as we’re providing the solution?

We will address one of the most common error codes in this blog post, i.e. Epson Printer Error Code 000041. This error happens when inside the printer the ink cartridges are not properly mounted or may also occur because of depleted cartridges. Follow our troubleshooting measures to get rid of this mistake, which could help you out.

Causes of Epson Printer Error Code 000041

Here I’m going to talk about Epson printer error code 000041. Error 000041 is shown on the Epson printer when the ink cartridge is not mounted or properly attached to the printer. Basically, this mistake suggests a problem with the ink cartridge in your printer.

Make sure that all the cartridges are in their proper slot before providing any print. Also, check whether or not the printer is compatible with the ink cartridge or is workable. In the open air, do not position the ink cartridge; this can lead to ink clogs. In case, if you see any clogs then clean it by using any cotton cloth. Wipe the cartridge part gently in the device and after this reboot your printer.

epson-printer-error-code-000041

If you see a cartridge problem, then replace it with a new cartridge. If you see any other form of error or warning shown on-screen you can contact or report to Epson, except all these problems. They are professional and experienced in solving the various complex problems associated with printers (Epson).

Epson printers are one of the best printer brands and are commonly used in households, offices, and other business areas. While Epson printers are known for high-performance.

Methods to Fix Epson Error Code 000041

Especially when you have the best technology company on your side, it is not so hard to fix this mistake. In solving the numerous complex problems concerning the Epson printers, we are experienced and professional.

Method 1: Uninstall and Reinstall Printer Driver

  1. To restart the printer, first of all, press and hold the on or off button.
  2. Enter the login information in the Administrative User area.
  3. By pressing the Start button, switch to the Start menu.
  4. Now, type ‘MMC’ in the search window.
  5. The Microsoft Management Console shortcut mechanism appears on the Start menu screen, and you click on it.
  6. Navigate to the File menu option after that. To open it, pick and click on the Add or Delete Snap-in button.
  7. Scroll down the list and pick the snap-in icon for ‘Print Management.’
  8. Click on the Add Icon button.
  9. Add the Local Server option, click the Finish icon and then click the Ok button to proceed with the operation.
  10. Drop down to the name of the device, and pick the driver tree option from the list.
  11. Right-click on the driver that you would like to delete.
  12. Then select the Delete Driver Package option and press it.
  13. Next, restart your printer system and instal some new print drivers as well.

Method 2 – Fix the Expended Ink Cartridge Issue

As we have mentioned above, Epson printer error 000041 is mainly due to incorrect ink cartridge installation. You can erase this error easily by following the steps below:

  1. The first thing you need to do is to turn your printer system on and verify that the ink cartridges are expended or not properly mounted.
  2. If the ink cartridge is used in the printer, replace it immediately with a new one.
  3. Then check the small metal clips that make direct contact with the chip and clean the dus as well the dust with a cloth.
  4. Make sure to clean the cartridge chip as well.
  5. Reinstall the printer driver on your operating system after that.

Method 3 – Steps to Resolve the Incorrect Installation of Ink Cartridges

  1. Switch on your Epson printer first and check if the ink cartridges have been mounted improperly.
  2. Remove and reinstall the ink cartridges in the right way after that.
  3. If you find an error on the Epson printer error 000041, click the Start button to move the ink cartridges back to their location.
  4. Press the mounted cartridges down now and press “Start” again. Any paper can be printed now.

Best Assistance for Epson error code 000041

When you sprint to a nearby shop to get your printer problem Epson error code 000041 solved in more than 2 or 3 days, those days are gone. And now you’re going to get the answer by staying in your place and your job won’t suffer anymore. The Tech Support Specialist is open to its customers for 24 hours. Thus in our step-by-step guide, you can interact with us whenever you are stuck in between any problems or have doubts.

Related Blog : Epson Printer Error Code 000043

In our job, we are very professional and ensure that from our end, you get the best support. Via Live Chat, you can also communicate with us. Simply send us a message and our team of experts will soon connect you back and immediately provide a suitable solution to your printer problem. Feel free to call us at our toll-free number for a call.

17Jun/20

Epson Perfection V600 Setup

Epson Scanner V600 Setup: A Comprehensive Guide

Epson is one of the leading brands that is known for the best products it offers to its clients. Epson Scanner V600 is once such a great device. It enables you to make the most of your documents and photos with a range of special features, which are delivered with high speed and high quality. You can be as enthusiastic about scanning your documents and photos as you are capturing them.

The great thing is that this will work on your photos as well as on your documents. Additionally, the Epson scanner V600 is a flatbed scanner capable of scanning 120 films in the 35 mm film. It is also compatible with Energy Star, and effectively uses energy to search LED technology. So, you can expect the high-quality scanning with very low power consumption and with no warmup time required for scanning via Epson scanner V600.

Epson Scanner V600 Setup

Most of the people use it preferably for its advanced features. Many users also reported buying this product but do not know the setup process for the Epson scanner V600. If you don’t know the process either, then this article will help. You will get all the details you need about the setup process for the Epson Perfection V600 Setup here.

Know the Complete Procedure for Epson Perfection V600 Setup:

After purchasing this unit, you might wonder about the Epson scanner V600 setup process. Before setting up this device, you have to remove the Epson scanner from the box and also remove all the packing elements from your scanner. Now, we are going to discuss the setup process of this printer. Let’s have a look at the section below:

Step 1 – Install the SCSI Interface Board

You have to install the SCSI program and the SCSI board before downloading this scanner driver and device applications. To do that, follow the points:

  1. Power off the computer, and any devices outside.
  2. Then remove all power cords, and detach all cables from your computer’s back side.
  3. Lift the cover up from the computer.
  4. Enter the interface board into an empty ISA 16-bit expansion slot; then adjust it with the help of screw retention.
  5. Displace the computer cover and connect all the cables again.

Step 2 – Install the Optional Transparency Unit

Now you have to install the optional transparency unit on your scanner. To do that, go through the steps mentioned below:

  1. Ensure that the optical assembly on the transparency unit is unlocked. You have to push down to move the slider to the unlock symbol. The optical assembly must be in the home position.
  2. Put the hinge brackets on the transparency unit into the slots at the back of the scanner.
  3. Put the cable connected to the transparency unit into the OPTION connector on the back of the scanner
  4. Find the power adapter, and attach the power adapter plug to the transparency device back carefully.
  5. Connect the power cord to the battery adapter and insert into the wall socket the other end of the power cord.

Step 3 – Unlock the Scanner

You’ll need to unlock the scanner after downloading the optional transparency package. Then, the paper cover is raised and the carriage lock is turned to the unlock spot.

Step 4 – Set the SCSI ID Number

The scanner is set from the factory to SCSI ID 5. If this the problem, then you have to change the number. Use the small top screwdriver to turn the rotary switch backside. Make sure you must choose the unique number that is not in conflict with other SCSI devices.

Step 5 – Connect the Scanner to your Computer  

Once you attach the scanner to the machine, both the device and the scanner have to be switched off. To do so, follow the points out below:

  1. First, locate the connector cable and take the SCSI connector and attach it to the one end of the scanner at the bottom. Connect it to the SCSI port on your computer or other SCSI devices after that, is another end.
    Next you need to find the terminator SCSI. If the scanner is the only SCSI device, you will be able to connect to your computer or if it is the last device in the SCSI chain the SCSI terminator into the empty SCSI connector on the back side of the scanner.
  2. Then, attach the power cable to the scanner.
  3. After doing this, connect the power cables for your computer, scanner, and
    other outside SCSI devices.

Step 6 – Install the SCSI Software

The SCSI software must now be installed on your system. To do that, execute the below steps:

  1. First, power on the Scanner and switch on the Computer.
  2. Then, insert the Epson Scanner V600 CD-ROM into the CD port of the system. (If the Epson Scanner V600 installer opens, click on the Exit option.)
  3. Click on the browser and change to your CD_ROM drive. Now, you will find that the SCSI driver has started the installation process.
  4. Once it is done, power off your scanner and wait for a few seconds and again turn it on

Step 7 – Install the Epson Scanner V600 Software  

You must install the SCSI card and SCSI driver before you start, and also ensure that your scanner is attached and switched on to your computer. Now, the Epson scanner V600 program must be installed on your computer. Follow the directions given below to do that:

  1. Start your system and insert the CD to install the driver.
  2. Now, you can see the installer window page opens. If you do not see this page, then go to the File menu, select the Run option. Then, you have to write D:\setup and click on the OK option.
  3. If the installer page opens, click on the Install option to install the scanner drivers. To complete the installation process, follow the on-screen instructions carefully.
  4. Once it gets completed, restart your PC instructions carefully.
  5. Once it gets completed, restart your PC.

Step 8 – Test the Connection

After connecting all the connectors, then you have to test the connection. Follow the points cited below to test the connection:

  1. Start the Test Scanner.
  2. Click the Check link below.
  3. Then, press the button Scan.
  4. If the test is completed, you will see a message that the scanning process is successful.

Conclusion of Epson Perfection V600 Setup

Now, after carefully reading this post, you get a detailed knowledge of the setup process for the Epson Scanner V600 setup. Hopefully, this article helps you set up this scanner on your computer. If you face any problem after performing all of the above steps, then you can contact a professional for help.

Related Blog : Epson Scanner Communication Error

05Feb/20

How to Fix Epson Printer Driver Error 1131? [Fixed]

Repair Epson Printer Driver Error 1131 Online

Epson printers are among the best printers that people around the globe use. Because of its user-friendly interface and its beautiful quality prints, most users prefer it. But like all electronic gadgets, Epson printer isn’t free of bugs, either. One such error is the Epson printer driver error 1131, which is uncommon in occurrence. This particular issue occurs when the users try to update the device driver.

Epson Printer Utility Setup Error 1131Epson Printer Utility Setup Error 1131

If you are having the same dilemma as well, then you must resolve it as soon as possible. Keeping that in mind here, we’ll explore some cool tricks in this article that will help you overcome the mistake. But you have to follow exactly the same steps as stated in the next section.

Reasons Behind Epson Printer Driver Update Error 1131:

The Epson printer driver error 1131 can arise from a number of causes. When you know the exact reason behind the problem then it will be easier for you to solve it. So let’s continue a brief discussion of why:

  1. Epson printer driver update error 1131 is basically caused by incorrect device file configuration. This produces a range of operating system registry errors which you are using. So you must patch the defective registry key at that time as soon as possible.
  2. This mistake often happens when new programs or applications are installed without deleting the old software. It leads an incomplete operation, and also shows the error.
  3. If you’re connected to a bad or poor network or Wifi, Epson printer driver error 1131 may get stuck on the screen and you won’t be able to work properly with the computer..
  4. Besides, if your computer is infected by viruses, malware or spyware, then your system has a high chance of getting this error.

Signs and Symptoms of Epson Printer Driver Error 1131:

When you’re struggling with this problem with your computer, there are some signs that prevent you from operating the device properly. Look deeply into some of the signs of this particular problem.

  • The error message “this computer can’t start” is shown on the device’s screen.
  • Your Windows that run slowly and couldn’t respond to the mouse or keyboard.
  • Error code 1311 appears and crashes the recent program window.

How To Overcome Epson Printer Driver Error 1131:

To prevent time-consuming it is recommended to execute the steps in the exact same way as defined in the section. Here in this section we will explain some obvious solutions which will allow you to solve the problem as soon as possible.

Fix 1: Reinstall or Update Browser

Rarely an outdated browser could be the main reason for installing error 1131 on this Epson printer driver. You must uninstall the browser at that time, otherwise update its latest version. To do so, turn on your screen first and then navigate to the Start button. Tap Control panel after that, and navigate to the Program option. Then select Programs and Features and turn to the next option. Expand the list of installed programs inside your computer. Select your user name, and click the Uninstall button. Keep waiting for some time and then restart your computer to check whether or not the problem still exists.

If you don’t want to uninstall the browser, then you can also upgrade the software. Do the same until you see the name of your client inside the document..

Fix 2: Repair Windows System Files

If the first approach isn’t beneficial to you, then you can go on with this one. First you need to press the Start button and then switch to All Programs. Then select Accessories and you will see a prompt for commands opening on the screen. Now tap “Run as administrator,” then select the Yes option and proceed with the process.

Click the Command key, then type sfc / scannow in the file. Now, press the Enter key to let the cycle go. Keep waiting before Windows System File is retrieved by SFC. Restart your device after completion, and check whether or not the Epson printer utility setup error 1131 is resolved.

Fix 3: Execute System Checks

That will surely help you remove the error from your system as an alternative method. To do so, you need to place the installation media on your computer at first. After that, turn the media system off. Select the language according to your preference now, and also select the area. Now press “Repair Your Mac” and pick Troubleshooting. Navigate to and click on the “Command prompt.” Now it’s time to go tap on “Repair your computer.” and select Troubleshoot. Navigate to the “Command prompt” and click on it. Now, you have to put the command that is mentioned below. Also, press the Enter button after putting each command.

“sfc /scannow; chkdsk c: /f /r; bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd”

Now, while the scan is taking place, you will wait for some time. Upon completing the process exit the Command Prompt. Last but not least, restart your computer and check whether Epson printer driver error 1131 is resolved or still occurring..

Related Blog : Epson Scan Cannot Communicate With The Scanner

Ideally you would certainly get rid of the error code at a moment by reading the article carefully. But if you encounter any trouble with Epson printer driver update error 1131, then never think twice about getting in contact with a specialist as they will help you get rid of this error immediately and without any obstacles as well.

21Jan/20

Epson Scan Cannot Communicate With The Scanner

Epson Scan Cannot Communicate With The Scanner

While Epson Scan Cannot Communicate With The Scanner. Epson has developed a lightweight, feature-rich scanner with innovative designs that can support a superior on – the-go scanning job. The XP 310 scanner from Epson is considered one of the prominent scanners that can serve the purpose for your home, starting from images to documents. It can streamline the scanning process and also improve the efficiency. However, some users report to face technical failures while using this Epson scanner due to a recent Windows system update. A message ‘ epson scanner communication error’ appears as the most common problem.

This issue arises when the query for a scanner fails to search for any documents. A scanner has a crucial role in that day-to-day corporate life. But, if it does not run properly, it is regarded as a massive drawback for the printing and scanning industry. It’s here that this article comes at its tempo.

Read this article, and get a vivid idea of why this mistake happens abruptly. In addition, you’ll also learn about the effective tricks that can help you solve the problem.

General Reasons behind the Epson Scanner Communication Error

First of all, you must understand why Epson scanner communication error seems to by-pass the chances of its potential occurrence. There are a number of different factors which can contribute to this issue of communication.

Effective Methods: Resolve the Epson XP 310 Scanner Communication Error

The solutions listed below can help you mitigate the problem, if you are running Windows 7, 8 or 10. In addition, if you’ve recently updated to Windows 10, then these quick hacks can also help you recover from this problem. Take a look and attempt to follow the steps in the exact order given below:

Method 1: Run the Scanner software with the Administrative Privileges

At first, try using administrative privileges to run the scanning program. If you are attempting to link an external source, most applications will need administrative permission. It lets them do their job without interruption or any security check requirement. Now follow the steps to adjust the configuration of the application and to allow for administrative access.

Step 1: Navigate and right-click on the Epson Scan application. Select ‘ Properties ‘ option from the drop-down menu.

Step 2: Click on the’ Compatibility’ tab when the properties window appears and tick the box next to the’ Run this program as an administrator ‘ label. If the administrator favors lingering, then try taking the steps in the Compatibility Mode.

Step 3: Click on the Apply button to save the recent changes when you’re done. Finally, open the window and turn off your Epson scanner and remove your USB from the network. Set the scanner again after 3-4 minutes, and see if the scanning is successful.

Method 2: Fix the Wireless Connection Settings

If the Epson scan application does not associate the scanner, due to problems concerning the LAN address of the network. Even if the network is designed to automatically connect, this may fail to do so abruptly. Instead, in this case, you need to manually change the address via the prompt command. Let us begin by taking the steps:

Step 1: Via the program shortcut, navigate to the’ Epson Scan Settings ‘ window. Otherwise the window can also be opened via the Windows search tab.

Step 2: Click on the’ Add’ option below the’ Network Scanner Address ‘ label when you reach the scan settings. You now have to select the correct scanner using the options in the drop-down menu.

Step 3: A new window opens, simply navigate to the Prompt command to get the correct address. Copy the address now and paste it to the’ Enter Address ‘ tab.

Step 4: Locate, and click the Windows icon. Type’ cmd’ in and wait until the application opens as soon as the dialog box appears. Type the ‘ipconfig’ command again, and press the Enter button.

Step 5: Go to your default browser now and paste the value in the address bar. The administrative interface of your router appears, logs in and checks whether your Epson scanner appears under the label ‘ attached devices to the network.’

Step 6: In the Scanner program, enter the scanner code, and press the Apply button. Also, you can select the’ Test’ option to check if the.

Now you can use the’ scan utility’ service to the complete without any difficulty. If this approach seems too difficult, though, then you can go hacking for the next solution.

Popular Blog : Epson Printer Error Code 0XE5

Method 3: Try using a shorter USB cable

It’s a known fact that if you’re linking the scanner and device with a long USB cable, you’re likely to lose more signals. So, try considering a shorter cable and note whether or not the link issues are resolved. This is just a quick fix and you need to check to see if this solution is working. Otherwise, you can also go to the next Epson scanner communication error solving method.

Method 4: Restart Shell Hardware Detection

The Shell Hardware Detection service is the primary tool for helping you determine whether any external hardware has a proper connection to your device. It operates automatically and notifies hardware events for every autoplay. Perhaps the machine faces a challenge with this device and the scanner fails to identify. Let’s try to fix this tool, so your scanner can be reconnected to your system.

Step 1: To start you need to simultaneously press both the Windows key and the R key. Type’ services.msc’ in and press the Enter key when a dialog box appears. As a result of the search a list of file names appears.

Step 2: Try to locate the’ Shell Hardware Detection ‘ service from the result list, and right-click it. Click on the’ Properties ‘ option from the drop-down menu, and wait for a new window.

Step 3: Now, check if the type of startup is set to the’ Automatic’ option and the window simply exists. Navigate to the’ operation’ file again, right-click on it and choose’ Restart’ option.

Step 4: Unplug the scanner from your monitor, and wait for a couple of minutes. Again, reconnect the devices with precision and check if your program can recognize the scanner.

Method 5: Update the Scanner DriversIf the above solutions can not help you fix the communications error of the Epson scanner, then the scanning drivers might have a definite problem. You will need to navigate to the manufacturer’s website to initiate the process. Check compatibility, and find out if the new scanner drivers are available. Note the model number of the Epson XP 310 scanner for quick identification of the requisite version. Now proceed with the steps:

Step 1: Open the Run dialog box, simultaneously by pressing both the Windows key and the “R” key. Type’ devmgmt.msc’ and press Enter. You will note that the device manager for the computer opens.

Step 2: Note that if you can view any hardware, go to the sub-menu and select the’ Imaging devices ‘ option. In fact, you need to right-click the Epson scanner icon and from the drop-down menu choose ‘Update driver’.

Step 3: You will finally confirm that you plan to upgrade the drivers. Click the’ Browse my driver software machine ‘ option, and follow the prompts on the screen. The driver files are downloaded to your system and automatically updated.

There are a few times you have to go for an older version when a new driver fails to work then. Download them using the same approach as above. In addition, This Epson Scanner comes with an in-built printer so you also need to update the printer drivers.

Method 6: Uninstall Epson Scan

You should try uninstalling Epson Scan, too. To do this, navigate to’ Windows Explorer’ and to’ C:\Windows’ in the address bar form. You will note that a results list appears on the screen containing various file names. Try to locate, and rename, the file called’ twain 32.’ You can use’ twain old’ to change the name. Upon completion of the process restart your computer to help configure your device the recent changes. Finally, this uninstalls ‘Epson Scan’. Wait for a couple of minutes and reinstall it again, this will help to sort the problem.

To Sum It Up to Resolve Epson Scan Cannot Communicate With The Scanner

The information provided in the section above must be sufficient to help you eradicate the epson scanner communication error on the Epson XP 310 scanner from its root. Therefore, if the problems remain, then try to check if there are any constraints on the network and make sure you have typed the scanner hardware into the exact network configurations. Finally, you can also check if the ports are in your device are working appropriately and then try plugging in the hardware. However, if you are not acquainted with the technical domain, then try to gain requisite technical guidance.

27Nov/19

How to Fix Epson Printer Error Code 031008 ?

Epson Printer Error Code 031008

A printer is a valuable tool that eliminates the pressure of tedious volumes of paperwork. No brand other than Epson can meet high expectations when considering purchasing the printer’s premium quality. Epson Inc. is a multinational brand with a wide variety of other exciting features and quality printing. A broad range of products – one laser, inkjets, wireless, color, and printers – is developing. During service, Epson printer models frequently create various error codes irrespective of the unequaled quality of the business. Epson Printer Error Code 031008

Guide to Fix Epson Printer Error Code 031008

The most common mistake with Epson printer error code 031008. The most popular Epson printer models are Epson Workforce Pro WF-4750, Epson WF-4720, and more, which is the worst victim for the post. The error code 031008 is generally caused by improperly inserting the printhead or ink cartridges. This error code will result in the accumulation of dust on those two components of the printer. It abruptly occurs between a printing session without a previous post. If you struggle with this error code when working on the Epson printer, read this blog and repair your printer error as soon as possible.

Quick Solve Error Message 031008 on Your Own:

The sudden appearance of Epson printer error code 031008 may cause an indefinite time break to your printing session. Check the basic steps you can use to quickly fix this error code.

epson error code 031008

Restarting Your Epson Printer:

Knowing that most printer error codes and messages disappear after you restart the machine may be a little surprising. Follow the steps below to solve the problem as soon as possible:

  • Remove the power cable from the power source
  • Tap on the power button  and hold it for approximately 60 seconds
  • Plugin the power cable into the wall outlet again
  • Leave the power button as soon as the printer is turned on
  • Try to take a sample print to check whether the error code reappears or not

If the error message reappears on the control panel of your Epson printer, try resetting your Epson printer. Below you will find the necessary steps to reset your Epson printer.

Epson Error Code 031008 by Hard Resetting the Printer:

Printer reset is a complex process involving a number of complex steps. Only perform this method when you are confident that during the process you will not make any mistakes. A manual error could damage your device and reduce its efficiency. Some easy steps below to reboot your Epson printer can be applied by any beginner:

Steps to Reboot Your Epson Printer:

  • Switch off the printer and take out the power cord from the wall outlet
  • Wait for some time and then plug in the power cord again to the wall outlet
  • Power on the printer and hold the resume key for another 10 to 20 seconds
  • You will receive a message saying “reset the printer to default settings” in the control panel of your Epson printer
  • Tap on “OK” and release the resume key
  • Take a sample print to inspect if the error message appears again

If you get Epson printer error 031008 on your again, it shows that either the printhead or the cartridge is the problem. These two vital printer components need to be instantly cleaned or reinstalled to fix Epson printer error code 031008. Go thoroughly through the next paragraph to know how to proceed with the process of cleaning or resetting.

Clean and Reset the Ink Cartridge of Your Epson Printer:

The ink cartridge is an essential component of any printer that provides the printer with ink constantly to create the prints. If the ink cartridge is not properly installed, Epson error code 031008 may appear during the session of printing. Following are the steps to reset the faulty installation ink cartridge.

  • Power of the printer and remove all attached cables and cords
  • Open the cartridge cover and remove the ink cartridge from your Epson printer
  • Clean it with a dry cotton cloth and reinsert it again
  • Tap on the reset button firmly against the chip contacts present on the cartridge for sometime
  • A bright red light will blink which indicates a strong contact between the cartridge and the printer has been established
  • Hold the reset button for a few seconds until the green LED light begins to blink
  • This will confirm the successful completion of the cartridge reset process

Smart Tricks to Connect Epson Printer Setup Utility

Check if your printer is affected by Epson error code 031008 by taking a sample print. If the answer is yes, you can be sure that the ink cartridge is not the factor that causes this error code to occur. Instead, a problem in the installation of the printer head could cause this error code to appear. The next paragraph gives you a thorough overview of the installation/cleaning process of the printhead.

Wondering How to Reinstall or Clean the Printhead of Your Epson Printer?

You can use the automatic and manual process to clean the printhead. The automatic process involves using the guidelines mentioned in your device’s printer manual. The manual cleaning process steps will be discussed below:

  • Power off the printer by unplugging the power cords from the wall outlet
  • Take out the ink cartridges from the printer
  • Take the printhead out from the printer by opening the latch behind
  • Take a dry cotton cloth and clean the printhead contacts properly
  • Place the printhead again within the device and use the latch to set the printhead in its correct location
  • Place the ink cartridges again within the printer
  • Take a sample print to confirm the removal of this error code

Receiving the same error code over and over again on the control panel of your Epson printer? To fix printer problems efficiently and at a budget-friendly price, you need to consult a reliable printer repair service provider.

Fix Epson Printer Error Code 031008 by +1-833-639-7277 Connecting with Us:

Sudden impediments in the press will break off vital official tasks and demand urgent consideration. Our technology experts at Epsonprintersupport 247 are recognized as the most trustworthy printing services provider on the market by providing advanced solutions. Regardless of the time, call our printer and tell our professional engineers about your issues. You’ll have a printer repair service at an affordable price to correct printer issues like Epson Error Code 0x97 perfectly. You can contact us and obtain solutions within the next 24 hours. In addition, you can talk to our tech experts in real-time through our live chat window during busy working hours. In a short time, you will find immediate answers to all Epson-related error.

19Aug/19

How to Setup Epson Printer on Windows 10?

Epson Printer Setup on Windows 10

In our daily lives, office or home we all frequently use the printer for our private and professional use, printers are the correct hand for the day-to-day solution. We need to know the difficulties we face when using printer as an unsuitable set-up or technical failure could lead to device malfunction.

Here, on Windows 10, we will comprehend the configuration of Epson Printer. Follow the measures to assist you solve your Epson printer problems on Windows 10 for fast troubleshooting.

Please follow the Epson Printer Setup Guidelines for Windows 10:

Step 1: Connect and switch the printer ON after plugging into the socket.
Step 2: Connect the printer to the Windows 10 operating system device.
Step 3: Click the option to begin and go to the panel control.
Step 4: To add the printer, click on the machines and printers.
Step 5: Select the option to add a manually setting local printer or network and proceed next.
Step 6: Select a port to enable your system to synchronize printer data.
Step 7: Check the Windows Update panel as it shows the updated Epson printer list and choose the right driver version, prefer the recent or larger driver version.

Epson Printer would be set up on Windows 10 to select the recent driver version. Connectivity Issue Fix: Sometimes the printer may not operate owing to linking mistakes when connecting to a USB connection, please inspect the ports by left-clicking on the printer and scanning characteristics.

These guides can assist you install Epson Printer successfully on Windows 10. You can also visit the Official Epson website or contact helpline for further help if there is still a problem.

If you are unable to Setup Epson Printer on Windows 10, Dial +1-833-639-7277 for Epson Printer setup on Windows 10, 7, 8. Contact for Epson Wireless Printer setup Online Now.